Parallels Remote Access Server RADIUS Configuration
To configure Radius properties:
In the Parallels RAS Console, navigate to the Connection > Second Level Authentication tab.
In the Provider drop-down list, select Radius.
Click the Settings button. The Radius Properties dialog opens.
823pxIn the Server field, enter the hostname or IP address of the Radius Server. (see inWebo RADIUS server list)
In the Port field, enter the port number for the Radius Server. (1812)
In the Timeout field, specify the packet timeout in seconds.
In the Retries field, specify the number of retries when attempting to establish a connection.
For inWebo the Radius authentication time (Timeout*(Retries+1)) should be below the 30s duration of an OTP
Type the Secret Key and specify the Password Encoding as PAP (Password Authentication Protocol)
Click OK when done.
Click the Check connection button to validate the connection. If the connection is configured correctly, you will see a confirmation message.
In the Value field, enter the value for the selected attribute type (numeric, string, IP address, date, etc).
About ‘push’ RADIUS mode if you are using the 'push' radius mode (notification sent to the user's smartphone), the global response time must be long enough to allow the user to authenticate with his smartphone. A "Radius Authentication time" of 60 seconds is recommended. (timeout 60 / 1 Retries)
inWebo RADIUS servers
Fill the indication for your first inWebo radius authentication server: